.:.:.:.:
RTTP
.
Mobile
:.:.:.:.
[
<--back
] [
Home
][
Pics
][
News
][
Ads
][
Events
][
Forum
][
Band
][
Search
]
full forum
|
bottom
Reply
[
login
]
SPAM Filter:
re-type this
(values are 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E, or F)
you are quoting a heck of a lot there.
[QUOTE]blah blah blah[/QUOTE] to reply to ffsmasher.
Please remove excess text as not to re-post tons
message
[QUOTE="ffsmasher:676421"]I mod xboxs to play backedup games, but I also mod them to run more efficiently. to repair the red ring of death using the X-Clamp fix is relatively simple. The xbox has a design flaw that when it begins to heat up the 'x-clamps' on the underside of the motherboard that hold down the heatsinks don't actually flex and they cause the motherboard to flex on the ends forcing the GPU and the CPU in the middle of the board to actually pop out of the socket. So to fix this you need to remove the x-clamps, remove the heatsinks and apply your own thermal paste (preferably arctic silver). Turn the xbox on after the chips are back in place for about two minutes until you get to red flashes to inform you that the xbox is overheating. The reason for this step is so the solderballs will actually melt and re-solder itself to the chipset. You can then reattach everything and the xbox should work fine. For in-detail steps please see http://forums.xbox-scene.com/index.php?showtopic=599216 [/QUOTE]
top
[
Vers. 0.12
][ 0.006 secs/8 queries][
refresh
][