.:.:.:.:
RTTP
.
Mobile
:.:.:.:.
[
<--back
] [
Home
][
Pics
][
News
][
Ads
][
Events
][
Forum
][
Band
][
Search
]
full forum
|
bottom
Reply
[
login
]
SPAM Filter:
re-type this
(values are 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E, or F)
you are quoting a heck of a lot there.
[QUOTE]blah blah blah[/QUOTE] to reply to Niccolai.
Please remove excess text as not to re-post tons
message
[QUOTE="Niccolai:710754"]impedance is a measure of resistance. the unit of measurement is ohms. the lower the impedance, the more the resistance. for example: ohms law dictates that total resistance is found by sutracting the sum of your total circuits from the product of your total circuits. if you were to combine two 8 ohm cabs, it would equal 4 ohms. because cab1 = 8 ohms cab 2 = 8 ohms first multiply them to get cabs1&2 = 64 ohms then add and get cabs 1+2 = 16 ohms then divide the 64 by 16 to get your total resistance. 64/16=4 ohms. of course, as you add more speakers that your head has to power, it uses more electricity, so your wattage will increase while your impedance decreases. a head rated at 100 watts at 8 ohms or 200 watts at 4 ohms will be able to run either one 100 watt cab at 8 ohms, or two at 4 ohms. sorry if the explination is complicated, but it's hard to find words to explain alot of it. if you're uncomfortable with resistance and crap, just use cabs that were made for your head and you probably won't have any problems.[/QUOTE]
top
[
Vers. 0.12
][ 0.003 secs/8 queries][
refresh
][